top of page
White Car

Automotive

Engineering the Future of Automotive Reliability

At JJ Engitech, we recognize the complexities automotive design engineers encounter—navigating high loads, extreme temperatures, corrosive conditions, and the constant need for top performance. You’re challenged to deliver vehicles that are not only safer and more durable, but also cost-effective and compliant with ever-evolving industry standards.

With the rapid shift toward electrification and autonomous driving, optimizing every vehicle component for maximum weight and space efficiency is essential. Consistent, high-performance reliability isn’t just an advantage—it’s a necessity for maintaining your competitive edge and ensuring customer satisfaction.

Automotive_Car

Applications

  • Steering Systems: Yoke Support, Steering Column, Gear Pump Bearings

  • Transmissions: Rear Output Shaft, Main Shaft and Reverse Idle Bearings, Clutches, Pumps, Solenoids, Planetary Gear Sets, Gear Shifting Forks

  • Seats: Seat Recliner, Height Adjuster Mechanisms

  • Axles: Driveline Systems, Kingpins

  • Brake Systems

  • Hinges: door, trunk and hood hinges, door checkers

  • Engine Management: Water and Oil Pumps, Belt Tensioners, Pulley Dampers, Compressors

  • Wipers, Convertible Tops, Interiors, Struts & Shock Absorbers, Levers, Pedals

White Car

Industrial

Engineering the Future of Reliability

Designing industrial equipment demands bearings that endure high loads, resist contaminants, and perform reliably under stress. Precision is crucial for efficient machinery, while durability reduces maintenance and downtime costs. Effective lubrication often requires self-lubricating or low-maintenance solutions for harsh environments. Bearings must also minimize noise and vibration, fit compact spaces, and enhance energy efficiency. Cost constraints are constantly balanced with performance to deliver high-quality, dependable systems. Our solutions increase system efficiency, provide longevity, and ensure value across industrial applications.

Electric Grinder

Applications

  • Awnings, Bending Presses, Cable Winding Devices

  • Elevators, Escalators, Lifts

  • Food processing equipment

  • Heat-Treating Units

  • Industrial applications on both land and underwater​

  • Injection molding machines, Tyre molding machine, Machine Tools

  • Manufacturing Equipment, Multi-Ram Press Guides

  • Material Handling & Packaging Equipment

  • Power Tools

White Car

Construction &
Mining

Engineering the Future of Reliability

Construction and mining equipment require bearings that withstand heavy loads, constant shock, and extreme vibration. Operating in harsh environments, these components must resist dirt, dust, moisture, and temperature fluctuations while providing long-term durability. Design engineers balance performance, reliability, and compact sizing, ensuring minimal downtime and maintenance disruptions. Our solutions offer self-lubrication, resisting wear from abrasive particles and extending service life in challenging field conditions. Superior corrosion resistance, wide temperature tolerance, and low friction improve operational efficiency and operator comfort. Our bearings and coatings reduce noise while supporting cost-effective, high-performance designs for construction and off-highway vehicles. Our products meet industry standards for safety, reliability, and environmental compliance in demanding industrial applications.

Backhoe Loader

Applications

  • Articulating Joints, Axle Trunnion, Frame/Walking beam Trunnion

  • Blade Leveling Cylinders, Lift Cylinders, Steering Cylinders

  • Conveyors & Crawlers

  • Drill Pivot, Dump Body Pivot, Bucket Pivots

  • Kingpins, Linkage Pins

  • Motor Graders, Rock Shaft, Skid Steers

  • Suspension or Track Trunnions

  • Transmissions

  • Motor Grade, Off-highway 

  • Pipelayer 

  • Wheel tractor scrape, Track-type skidder 

  • Wheel-type loader, Track-type tractor 

  • Earthmoving compactor 

  • Excavator, Dozer

White Car

Primary Metals

Engineering the Future of Reliability

Equipment in the primary metals industry faces extreme heat, abrasion, and challenging upkeep demands. Harsh conditions in steel plants and foundries make regular maintenance difficult and disrupt operations. Design engineers must find solutions that ensure efficient, long-lasting performance in these environments. Our self-lubricating bearings thrive where conventional bearings fail, requiring minimal maintenance even under severe conditions. Advanced surface engineering enhances bearing durability and extends the service life of critical equipment. Our custom-designs bearings to meet the fit and needs of each unique primary metals application. These solutions help plants run efficiently, lower downtime, and protect equipment investments in the harshest environments.

Iron Melting

Applications

  • Milling tools, Hyperbaric filters

  • Lifting devices, Ladle cover manipulator

  • Slide plates for quench machines, Conveyor rollers

  • Locking device casting cylinder

  • Pinch roll unit polisher

  • Laddle Turret

  • Bucket Pivot

White Car

Hydro, Wind &

Solar Power

Engineering the Future of Reliability

Design engineers in renewable energy face challenges selecting bearings for solar trackers, wind turbines, and hydropower dams due to harsh environments and extreme weather. Bearings must endure high winds, moisture, temperature shifts, and UV exposure while supporting heavy loads and dynamic forces. Reliable, low-maintenance operation in remote locations is critical for system longevity. Noise and vibration control meet regulations and improve comfort. Energy efficiency optimization and overcoming lubrication difficulties are essential, especially within space constraints. JJ Engitech provides self-lubricating, corrosion-resistant bearings designed for these demands. Our solutions reduce friction, noise, and maintenance, maximizing renewable system performance and sustainability.

Hydroelectric Power Plant

Applications

  • Hydropower Dam Turbines

  • Francis & Kaplan Turbines, Pelton Turbines

  • Servo-Motors, Operating Ring Sliding Segment Linkages, Blade, Runner Hub

  • Wicket Gates (Guide Vanes) (Upper, Intermediate, and Lower) (Outer and Inner)

  • Injectors, Deflector

  • Intake Gate Sliding Segments and Roller

  • Spillway Gates, Lock Gates, Roller Gates, Radial Gates

  • Ancillary Equipment, Fish Screens, Trash Gates

  • Ball & Butterfly Valves

  • Solar Trackers

  • Wind Turbines Generator

  • Gearbox, Main Shaft Bearing, Rotor Shaft

White Car

Chemical Processing

Engineering the Future of Reliability

Gaskets in the chemical industry are critical for ensuring leak-proof seals in piping, valves, and vessels handling aggressive chemicals. They must withstand extreme temperatures, high pressures, and corrosive substances, maintaining integrity under harsh conditions. Metallic, non-metallic, and composite gaskets provide tailored solutions to meet these demands. Chemical-resistant materials like PTFE, graphite, and specialized alloys enhance longevity and safety. JJ Engitechs gaskets offer superior chemical compatibility, reducing downtime and maintenance costs. Their robust construction prevents hazardous leaks, protecting personnel and the environment. High-quality gaskets also improve operational efficiency by maintaining tight seals during fluctuating process conditions. Custom gasket designs accommodate diverse industrial setups and stringent regulatory standards. Trusted by global chemical plants, these gaskets support sustained, safe, and efficient chemical processing operations.

Modern Beer Brewery

Applications

Metallic Gaskets Applications:

  • Heat exchangers (flange joints between tubesheets and channel covers)

  • Compressors (sealing flanges and joints)

  • Condensers (tube sheet and flange seals)

  • Pumps (seal between casing and covers)

  • Valves (flange face sealing for pressure containment)

  • Pressure vessels (flange and manway joints)

  • Reactors (sealing covers and inspection ports)

Metallic Gaskets Applications:

  • Pipelines (pipe flange joint sealing)

  • Bonnet valves (seal between bonnet and valve body)

  • Heat exchangers (raised face and flat face flanges)

  • Compressors (low-pressure sealing points)

  • PTFE or rubber-lined pipes (chemical resistant sealing)

  • HVAC systems (duct flanges and joints)

  • Fluid transfer equipment (low pressure, chemical resistant seals)

​

​These gaskets are selected based on operating pressure, temperature, chemical compatibility, and mechanical stress at the fitment location.

White Car

Food & Pharma Beverage

Engineering the Future of Reliability

Gaskets and sealing solutions in the food, beverage, and pharmaceutical industries require the highest standards of hygiene and safety. JJ Engitech offers advanced sealing products designed to meet these strict industry regulations, ensuring contaminant-free processing environments. Our gaskets deliver outstanding chemical resistance and durability to withstand frequent cleaning and sterilization cycles. Materials provide exceptional reliability, reducing downtime and maintenance costs. These seals are engineered for compatibility with FDA, EC1935, and USP standards, ensuring safe direct contact with food and pharmaceutical products. Our solutions minimize leaks and contamination risks, protecting product integrity and consumer health. High-performance sealing supports efficient operations in varying temperature and pressure conditions typical in food and pharma production. From pumps to mixers and sterilizers, our gaskets optimize sealing performance across diverse applications. Trust JJ Engitech for innovative, compliant sealing solutions tailored to critical food, beverage, and pharmaceutical applications.

Bottles of Olive Oil

Applications

  • Diaphragm Pumps – Sealing inside filling units for product contact

  • Valve Seat Seals – Process media sealing within filling valves

  • Bottle Filling Seals – Flange and connector sealing in bottling machines

  • Mixers – Radial shaft seals, O-rings, and flat gaskets on rotating shafts and agitators

  • Tanks and Containers – Sealing tank lids, bottoms, and valves to prevent contamination

  • Piping and Transfer Equipment – Flanged joints, pumps, and valve connections using PTFE and rubber gaskets

  • Rotary Slide Valves and Feed Pumps – Clamp seals and hygienic sealing rings for material handling

  • Pharmaceutical Processing Lines – Static seals in coating, tablet production, and solid dosage equipment

  • Sterilization and Cleaning-in-Place Systems – Sanitary seals resistant to aggressive cleaning chemicals

  • HVAC and Fluid Systems – Sealing duct flanges and transferring fluids without leaks

​

These sealing solutions comply with FDA, EC1935, USP, and 3-A sanitary standards to ensure safety and hygiene.

We can solve your tribological issues

© 2025 JJ Engitech. All Rights Reserved.

  • Linkedin
bottom of page